NetGain Micro 880 Electric Motor for EV Conversions and Pump Applications
Netgain Micro 880 Gigavac GV200QA and Gigavac GV200PA Contactor, DIY EV Conversion Parts
Netgain Micro 880 Ampseal 35 Wiring Harness, DIY EV Conversion Parts
Netgain Controller for Micro 880 Motors/Systems, DIY EV Conversion Parts
NetGain Micro 880MV System
NetGain Micro 880 Electric Motor for EV Conversions and Pump Applications
Netgain Micro 880 Gigavac GV200QA and Gigavac GV200PA Contactor, DIY EV Conversion Parts
Netgain Micro 880 Ampseal 35 Wiring Harness, DIY EV Conversion Parts
Netgain Controller for Micro 880 Motors/Systems, DIY EV Conversion Parts
NetGain Micro 880MV System

NetGain Micro 880MV System

$4,035.00 Save $-4,035.00
/
Shipping calculated at checkout. Shipping Policy
Distinguished by its high compression potted stator, the Micro 880MV ™ ensures unparalleled reliability and thermal transfer. The independent IP rating of IP65 can be increased to IP67 with an optional shaft seal, or to IP69k when mated to a sealed gearbox. All Micro 880MV Systems™ include the brushless Micro 880MV™ Motor, HyPer-Drive™ Controller/Inverter, SmartView Programming Software, Low Voltage Wire Harness Kit, and Main Contactor. The Micro 880MV™ is identical to the Micro 880™ in every way, apart from its windings which produce similar torque while drawing 30% less phase current.
An optional Terminal Cover Kit with cable inlets on either the shaft side or the encoder side is available for additional protection.


Unique advantages of Micro 880MV Motors:

  • Brushless IPM Motor with High-Torque / Medium-Voltage Winding
  • Higher torque per amp output for lower current draw and cooler operation.
  • Flexible range of interface options for simplified application integration.
  • DC supply voltage from 80V to 144V nominal, and current up to 650Arms Peak.
  • "Bulletproof" high compression potted stator - A cutting-edge solution to vibration, ingress, and thermal gap concerns.
  • IP65 with or without optional terminal enclosure kit.
  • IP67 or IP69K is achieved through gearbox coupling or optional shaft seal.
  • Synchronous Fields - Full torque is harnessed without Rotor Slip.
  • Up to 95% Efficiency!

Motor Specifications:
        • Ideal Voltage: 80V to 144V Nominal
        • Current: 250-650 Arms
        • Efficiency Peak: 95%
        • S2-5min Power : 32kW
        • S2-60min Power : 10kW
        • RPM Peak: 7,000
        • Torque: 98 lbs.-ft.
        • Motor Diameter: 8.19” 
        • Motor Length: 6.3” 
        • Motor Weight: 40 lbs
        • Drive-End Mounting: 4x M8 on 152mm BC
        • Encoder-End Mounting: 3x M6 on 145mm BC
        • Insulation: 200°C
        • Software: SmartView 

Motor Interface Options:
        • Micro 881: 1.125" shaft with .250" keyway
        • Micro 882: 24mm shaft with 8mm keyway
        • Micro 883: 13T spline shaft with SAE-B adapter plate
        • Micro 884: 19mm shaft with 6mm keyway
        • Micro 885: 9T spline shaft with SAE-A adapter plate
        • Micro 886: 19T spline shaft with H12/24E/30E-Axle Adapter plate

Suggested Controller Options:
        • HyPer-Drive X48100: 48V, 1000A, Non-Isolated Logic - (Maximum Torque  /  Low speed)      
        • HyPer-Drive X1: 80/100V, 750A, Non-Isolated Logic - (High Torque  /  High speed)
        • HyPer-Drive X1 Iso: 80/100V, 750A, Isolated Logic - (High Torque  /  High speed)

Alternate Controller Options (contact us to order):
        • HyPer-Drive X4860: 36/48V, 600A, Non-Isolated Logic - (High Torque  /  Low Speed)
        • HyPer-Drive X125: 80/100V, 250A, Non-Isolated Logic - (Low Torque  /  High Speed)
        • HyPer-Drive X125 Iso: 80/100V, 250A, Isolated Logic - (Low Torque  /  High Speed)
        • HyPer-Drive X144: 144V, 500A, Isolated Logic - (High Torque  /  Maximum Speed)


All Micro 880 Systems (except motor only option) include the motor, controller, a standard Ampseal wire harness, and main contactor. Systems with non-isolated controllers include a Gigavac GV200QA-1 contactor, and systems with an isolated controller include a Gigavac GV200PA-1.

Micro 880MV Brochure (pdf)