Note: All motors ship via freight. Shipping will be billed separately. Please contact us prior to ordering for shipping quote.
The HyPer 13 Motor™ (SRIPM300-H13) is a low-RPM high-torque brute, wound to deliver 700 Nm of instant torque with a low voltage pack. Built for heavy-payload vehicles, displacement boats, and off-highway equipment. The optimal operating range of 750 to 3,000 RPM often allows builders to simplify or eliminate reduction gearboxes.
Unique advantages of HyPer 13 Motor™
- DC supply voltage from 80V to 144V Nominal, and current up to 700A Peak
- High Torque - 700 Nm (515 lb-ft) off the line (100 to 750 RPM @ 120V; 625 Nm @ 3,000 RPM)
- Peak Power - 87.5kW (117HP) arriving early at just 1,500 RPM (@ 120V)
- Heavy-Duty 38 mm 19-Tooth DIN 5482 Male Splined Shaft built for high-shock direct-drive loads
- Ideal for Direct-Drive Drivelines - Simplifies or eliminates multi-speed transmissions and reduction gears
- Air-Cooled Brushless Design - Zero coolant pumps, radiators, raw-water strainers, or leak points
- Harsh-Environment Ready - Fully sealed to IP66 standards against dust, mud, and bilge moisture
- Cageless Rotor & Synchronous Fields - Full torque harnessed without Rotor Slip
- Up to 95% Efficiency with low continuous current draw (370Arms S2-60) to extend battery life
- Field Oriented Control (FOC) algorithm optimized specifically for Synchronous Reluctance Internal Permanent Magnet motors
- Fully customizable controller I/O with PC-based SmartView Software
HyPer 13 Specifications:
-
Model - SRIPM300-H13
-
Shaft - 38mm 19T DIN 5482 Male Spline
-
Mounting - Flange (300mm Frame)
-
Ideal Voltage - 96V-144V Nominal (80V Compatible)
-
Current - 700Arms (S2-2) / 575Arms (S2-10) / 370Arms (S2-60)
-
Peak Eff. - 95%
-
S2-2min Power - 88kW @ 1,500RPM (120V) / 47.5kW @ 750RPM (80V)
-
S2-60min Power - 46kW @ 1,500RPM (120V)
-
Peak Torque - 700 Nm (515 lb/ft)
-
Max Speed - 6,000 RPM
-
Diameter - 321mm (12.83")
-
Length - 436mm (17.16")
-
Motor Weight - 181kg (400lb)
-
Inverter Weight - 4kg (9lbs)
-
Protection / Cooling - IP66 Sealed / Air-Cooled
-
Insulation - Class H
-
Software - Dana/TM4 SmartView
Suggested Controllers:
- HyPer-Drive X1: 100V, 750A, Non-Isolated Logic
- HyPer-Drive X1 Iso: 100V, 750A, Isolated Logic
-
HyPer-Drive X144: 144V, 500A, Isolated Logic
All HyPer 13 Systems (except motor only option) include the motor, controller, standard wire harness kit, precharge relay, and main contactor. Systems with non-isolated controllers include a Gigavac GV200QA-1 contactor, and systems with an isolated controller include a Gigavac GV200PA-1.
